Putzmeister Mixer pump:   MP 25

Machine with large supply hopper for dry mixed mortar 

Easy to dismantle but difficult to surpass. The MP 25 is a real all-rounder. It places all types of ready mixed dry mortar. No matter whether out of a bag or silo. In addition it mixes and pumps insulating plaster and even floor-screed. Suitable for all pumpable ready mixed dry mortars, bag material and material from a silo such as for example interior plaster (gypsum/gypsum-lime plaster); outside plasters and renders: (lime/lime-cement and insulating plasters), floor-screed, bonding mortar as well as reinforcement mortar.

MP 25 S  

Mixer pump drive, electric 5.5 kW 392 rpm, 400 V/50 Hz, pump type D6 Power, output 25 l/min at max. delivery pressure of 30 bar, max. grain 4 mm, hopper content 115 l, star-wheel drive 1.1 kW 23 rpm, conical mixer tube, hose connection M35/V25 mm. A feed cable with CEE plug 5 x 4 mm�, 32 A is recommended here. Incl. built-in water pump.

Standard equipment: 1 x mortar hose 15 m, 25/40 mm, 1x air hose 15 mm, 1⁄2 � spray gun NW 25/40, mixing shaft MI, compressor 208 NL/min with switch-off, cleaning tool, operating instructions, standard tool.
Part no. PM111 462.020

MP 25
Mixer pump drive, electr. 5.5 kW 392 rpm, 400 V/50 Hz, pump type D6 Power, output 25 l/min at max. delivery pressure of 30 bar, max. grain 4 mm, hopper content 115 l, star-wheel drive 1.1 kW 23 rpm, conical mixer tube, hose connection M35/V25 mm. Without built-in water pump. Recommended here is a feed cable with CEE plug 5x4 mm�,
32 A

Standard equipment: 1 x mortar hose 15 m, 25/40 mm, 1x air hose 15 m, 1⁄2'', spray gun NW 25/40, mixing shaft MI, compressor 208 NL/min with switch-off, cleaning tool, operating instructions, standard tools.
Part no. PM111 462.010
Technical data MP 25 S MP 25
Pump type: D6 Power
Output: 25 l/min
Del. pressure: 30 bar
Delivery distance: up to 40 m, 15 m high
Air compressor: piston compressor, 208 NL/min suction performance
Drive pump: 5,5 kW / 392 rpm
Drive hopper: 1,1 kW / 23 rpm
Weight: 240 kg 235 kg
Length: 1324 mm
Width: 728 mm
Height: 1443 mm
Filling height: 984 mm
Part no. 111 462.020 111 462.010
Standard equipment for the MP 25 PM Part no.
Mortar hose NW 25, 15 m with couplings 25/40 211 966.001
Air hose 1⁄2'', 15 m 212 333.002
Water connection piece GEKA/V25/40 207 936.003
Spray gun standard � short � 25/40 402 592
Reduction V35/V25/40 207 795.008
Stator D6 � Power � 206 345.006
Rotor D6 � Power � 203 452.002
Mixing tube � cleaner, cpl. 212 132.009
Supplementary equipment for the MP 25 PM Part no.
Blower hood with control cable, probe, rectangular 212 324.008
Transfer hood, rectangular, for work below silo, cpl. with silo connection and probe vibrator control 212 486.001
Round blower hood with control cable, probe, round (MS-x) 212 394.009
Mixer pump D5 instead of D6 for pump performance up to approx. 40 l/min (071 235.008)
(caution: hoses with NW 35 mm are necessary for D5)
002 730.006
(071 235.008)
Pressure booster pump (212 858.008), NTM built-in 002 781.000
Pressure booster pump added on site 230 V, 3.6 m�/h 208 186.001
Pressure booster pump added on site with automatic switching, 230V, 3.6 m�/h 212 383.007
Toolbox 213 531.007
Water filter 5m�/h, 3⁄4� GEKA 214 780.006
Cable 5 x 4 mm�, CEE plug, coupling 32 A,25 m long 062 022.003